Kyocera KM-3035 3035/4035/5035 Operation Guide Rev-6.0 - Page 172

Section 7 COPIER MANAGEMENT FUNCTIONS ● Default copy limit Perform the following procedure when you want to change the default copy limit for new department ID-codes. 1 Select "Def. Val. of coun. limit" under the "Setting item" column on the left side of the touch panel and then touch the "Change #" key. The "Def. Val. of coun. limit" screen will be displayed. Inch specifications Managem. Def. Set. Close Setting item Scanner Managem. Fax Management Excess of limit Setting Def. Val. of coun. limit Total size 1 Total size 2 Total size 3 Value On On Unable to use 999999 81/2x11" No specif. 81/2x11" No specif. 81/2x11" No specif. Default setting - Management - Managem. Def set. Change # Metric specifications Managem. Def. Set. Setting item Scanner Managem. Fax Management Excess of limit Setting Def. Val. of coun. limit Total size 1 Total size 2 Total size 3 Value On On You cannot use 999999 A3 No specif. B4 No specif. A4 No specif. Default setting - Management - Managem. Def set. Close Change # 2 Use the numeric keys on the keypad to enter the default copy limit. The limit can be set to any 1-page increment up to 999,999. Inch specifications Def. Val. of coun. limit Default value of counter limit can be set. Back Close (1~999,999) Limited value 999,999 Clear Default setting - Management - Managem. Def set. Metric specifications Def. Val. of coun. Limit Default value of counter limit can be set. (1~999,999) Limited value 999,999 Clear Back Close Default setting - Management - Managem. Def set. NOTE If you want to quit the displayed setting without changing it, touch the "Back" key. The touch panel will return to the screen in step 1. 3 Touch the "Close" key. The touch panel will return to the screen in step 1. 7-34