Kyocera KM-3035 3035/4035/5035 Operation Guide Rev-6.0 - Page 41
Interrupt copying, Press the [Interrupt] key to light the lamp in the [Interrupt]
View all Kyocera KM-3035 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
3. Interrupt copying Interrupt copying is useful if, during one copy job, you want to copy other originals at different settings. Once the rush job is completed, the interrupted copy job can be resumed at the same settings as before. 1 2 3A 1 2A3 1 Press the [Interrupt] key to light the lamp in the [Interrupt] key. "Interrupt mode OK" will be displayed. Section 4 BASIC OPERATION 4 When copying is completed, press the [Interrupt] key once again. The lamp in the [Interrupt] key will go out. Replace the newly copied originals with the ones removed before. Then, press the [Start] key. The interrupted copy job will be resumed. 2 Remove the originals that were currently being copied and put them aside. 3 Set the new originals and perform the desired copy procedure. 4-9