Kyocera KM-3035 3035/4035/5035 Operation Guide Rev-6.0 - Page 43

5. Energy-saving modes Inch specification If you press the [Energy Saver] key, even while the main power switch is still turned ON, the copier will enter one of the following two energysaving modes (a state of rest). ● Low power mode The lamp in the [Energy Saver] key will be the only lit indication on the operation panel. To resume copying, press the [Energy Saver] key once again. It will take the copier less than 12 seconds to return to a copy-ready state. ● Sleep mode Just like with the Low power mode, the lamp in the [Energy Saver] key will be the only lit indication on the operation panel, but even less power will be consumed in this mode. To resume copying, press the [Energy Saver] key once again. It will take the copier less than 25 seconds to return to a copy-ready state. DeCfaouulnt tSeer tting / Management Interrupt Energy Saver Reset 3 StoCpl/ear 2 1 6 5 4 9 Start 8 7 # 0 * Energy Saver Section 4 BASIC OPERATION The following two functions will also automatically cause the copier to enter the corresponding energy-saving mode if no operation is performed for a designated period of time. ● Auto low power function If no operation is performed on the copier for a designated period of time (adjustable between 1 and 240 minutes), the auto low power function will engage and cause the copier to automatically enter the Low power mode. The factory default setting is for 15 minutes. ● Auto sleep function If no operation is performed on the copier for a designated period of time (adjustable between 1 and 240 minutes), the auto sleep function will engage and automatically turn the main power switch OFF (O). When you want to make copies again, simply turn the main power switch back ON ( | ). The factory default setting is for 60 minutes. NOTES • If the optional Printer Kit or Printer/Scanner Kit is installed in your copier, you can switch between the energy-saving modes (Low power mode and Sleep mode) that will be entered into when the [Energy Saver] key is pressed. To change the energy-saving mode, see "Changing the energy-saving mode" on page 7-58. • If you are using a standard copier, or if the optional Fax Kit is installed in your copier, you can press the [Energy Saver] key to engage the Low power mode. • If the optional Fax Kit, Printer Kit or Printer/Scanner Kit are installed in your copier and a received fax job or a print job is detected while the copier is in one of the energy-saving modes, it will automatically return to a copy-ready state and print out the corresponding job. Copiers are generally in a standby mode more than they are in actual operation, so power consumption in the standby mode occupies a large part of overall consumption. Having the copier enter a rest state after a certain amount of time, or turning the power completely OFF (O), reduces unnecessary power consumption in the standby mode and as a result can save on electricity bills. NOTES • The auto low power function will not engage when the copier is in the sleep mode. • In order to change the amount of time that will elapse before the auto low power function engages, see "Auto low power time" on page 7-48. • In order to change the amount of time that will elapse before the auto sleep function engages, see "Auto sleep time" on page 7-47. In order to disable the auto sleep function, see "Auto sleep ON/OFF" on page 7-57. • If the optional Printer Kit or Printer/Scanner Kit is installed in your copier, the copier will enter the Sleep mode whenever the auto sleep function engages. In this state, when the copier detects data for a print job, it will automatically recover to a print-ready state and print out of the corresponding information will begin. • If the optional Fax Kit is installed in your copier, the copier will be automatically turned OFF (O) whenever the auto sleep function engages. In this state, when the copier receives an incoming fax, it will automatically recover to a print-ready state and print out of the corresponding information will begin. 4-11