Kyocera KM-3035 3035/4035/5035 Operation Guide Rev-6.0 - Page 270
Misfeed in Document Processor optional JAM 70 to 76
View all Kyocera KM-3035 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 270 highlights
Section 9 TROUBLESHOOTING 2 Misfeed in Document Processor (optional) (JAM 70 to 76) If the message below appears, a misfeed has occurred in the Document Processor. Remove the misfed original using the procedure given below. Inch specifications Paper misfeed. 1. Open the document processor. 2. Raise the reverse unit up. 3. Turn the left dial. 4. Remove original(s). 5. Close Document processor. JAM 73 Metric specifications Paper misfeed. 1. Open document processor. 2. Raise reverse unit up. 3. Turn dial left. 4. Remove original (s). 5. Close Document processor. JAM 73 1 If the original is on the original table, remove it. 3 If the misfed original is found, remove it. * If paper is torn during removal, be sure to remove all loose scraps from inside the copier, or they could cause misfeed later. 4 Raise the reversing unit. 5 If the misfed original is found, remove it. * If paper is torn during removal, be sure to remove all loose scraps from inside the copier, or they could cause misfeed later. 2 Open the Document Processor original cover. 6 Turn the left knob to eject and remove the misfed original. 7 Close the Document Processor original cover. 9-10