Kyocera KM-3035 3035/4035/5035 Operation Guide Rev-6.0 - Page 279
<Cleaning the related parts>, AIMPORTANT
View all Kyocera KM-3035 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 279 highlights
Section 10 MAINTENANCE AND OPERATION INFORMATION 10 Push the electrostatic section (with the blue handle) to the right and then pull it out about 2 inches (5 cm). 13 Pull the electrostatic section out as far as it will go and then push it back into the copier to a point just BEFORE the roller A touches the white pad of the grid cleaner. Repeat this step a few times. 11 Remove the cap from the grid cleaner. IMPORTANT! DO NOT push the electrostatic section all the way back into the copier in this step as that may result in problems appearing in the printed images. 14 With the electrostatic section pulled out about 2 inches (5 cm), remove the grid cleaner and then push the electrostatic section all the way back into the copier. 12 Attach the grid cleaner to the machine body aligning with the notches. 15 Fit the new waste toner box into the copier. 10-5