Kyocera KM-3035 3035/4035/5035 Operation Guide Rev-6.0 - Page 274
Trouble, Checkpoint, Procedure, Reference, Open the front cover and pull and push back - manual for troubleshooting
View all Kyocera KM-3035 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 274 highlights
Section 9 TROUBLESHOOTING Trouble Checkpoint Copies come out too dark. Is the copier in the auto exposure mode? Procedure To change the overall exposure, perform the auto exposure adjustment. Reference page 7-73 Is the copier in the manual exposure mode? Adjust the exposure to the correct degree 4-2 using the copy exposure adjustment keys. To change the overall exposure, perform the exposure adjustment for the each copy quality mode. 7-75 7-76 7-77 Copies are dirty. Is the platen or the original cover dirty? Clean the platen and/or the original cover. 10-1 Open the front cover and pull and push back in the cleaning shaft. 10-5 Is the transfer roller contaminated? Clean the transfer roller with the cleaning brush. 10-2 Copy image is askew. Are the originals set correctly? When setting originals on the platen, align 4-1 their edges with the correct original size scale for their size. When setting originals in the optional 8-2 Document Processor, adjust the original insertion guides to the size of the originals correctly. Misfeed occurs frequently. Is the paper set correctly in the Set paper properly. 3-1 drawer[cassette]? Is paper curled, folded or wrinkled? Replace the paper with new paper. 3-1 Is there any misfed paper or loose scraps of Carry out the appropriate procedure to 9-4 paper remaining inside the copier? remove the paper. Copies are wrinkled. Is the separation in the paper feed section dirty? Clean the separator. 10-1 Black or white lines appear on the copy. Is the electrostatic section dirty? Open the front cover and pull and push back in the cleaning shaft. 10-5 9-14