Kyocera KM-3035 3035/4035/5035 Operation Guide Rev-6.0 - Page 264
When paper misfeeds, (1) Cautions, (2) Removal procedures, Cautions
View all Kyocera KM-3035 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 264 highlights
Section 9 TROUBLESHOOTING 3. When paper misfeeds If a paper misfeed occurs, a message will be displayed in the touch panel about the misfeed and copying will stop. Leave the main power switch ON ( | ) and refer to "(2) Removal procedures" to remove the jammed paper. Inch specification Paper misfeed. Careful for Drum. 1. Open left cover1. 2. Remove paper. 3. Close cover. Metric specification Paper misfeed. Careful for Drum. 1. Open left cover1. 2. Remove paper. 3. Close cover. JAM 30 JAM 30 (1) Cautions WARNING High voltage is present in the charger section. Take sufficient care when working in this area, as there is a danger of electrical shock. CAUTION The copier's fixing unit is extremely hot. Take sufficient care when working in this area, as there is a danger of getting burned. • Do not reuse misfed paper. • If paper is torn during removal, be sure to remove all loose scraps from inside the copier, or they could cause misfeed later. • After misfed paper has been removed, warm-up will begin. The Misfeed indicator will turn off and the copier will return to the same settings prior to the misfeed. (2) Removal procedures 1 Misfeed in paper feed section • Misfeed in drawer[cassette] (JAM 10 to 13, 15 to 17) If the message below appears, a misfeed has occurred in the drawer[cassette] (or optional Paper Feeder). Remove the misfed paper using the procedure given below. Inch specifications Paper misfeed. 1. Open cassette1. 2. Remove paper. 3. Set cassette. Metric specifications Paper misfeed. 1. Open cassette1. 2. Remove paper. 3. Set cassette. JAM 10 JAM 10 1 Open the drawer[cassette]. 9-4