Sharp MX-M260 MX-M260 MX-M310 Operation Manual - Page 102

SYSTEM SETTINGS (ADMINISTRATOR) PROGRAMS FOR PRINT MODE Program name Factory default settings Page PRINT SETTINGS DEFAULT SETTINGS PROHIBIT NOTICE PAGE Disabled 111 PRINTING PRINT DENSITY LEVEL 3 111 PROHIBIT TEST PAGE Disabled 111 PRINTING *4 ROTATED PRINT Enabled 111 FORCED OUTPUT OF Disabled 111 PRINT EXCLUDE BYPASS-TRAY Enabled 111 FROM ATS DISABLE DEFAULT Disabled 111 SETTING CHANGES *4 INTERFACE SETTINGS HEXADECIMAL DUMP Disabled 112 MODE *4 I/O TIMEOUT 180 (sec) 112 60 (sec) *4 USB PORT EMULATION PCL 112 SWITCHING *4 NETWORK PORT AUTO 112 EMULATION SWITCHING *4 PORT SWITCHING METHOD *4 SWITCH AT 113 END OF JOB ENABLE USB PORT *4 Enabled 113 ENABLE NETWORK Enabled 113 PORT *4 NETWORK SETTINGS *4 IP ADDRESS SETTING DHCP: Enabled 113 ENABLE TCP/IP Enabled 113 ENABLE NetWare Enabled 113 ENABLE EtherTalk Enabled 114 ENABLE NetBEUI Enabled 114 RESET THE NIC - 114 INITIALIZE AND/OR STORE SETTINGS *4 RESTORE FACTORY - 114 DEFAULTS STORE CURRENT - 114 CONFIGURATION RESTORE - 114 CONFIGURATION 100 PROGRAMS FOR NETWORK SCANNER MODE Program name Factory default settings SCANNER SETTINGS *1 INITIAL FILE FORMAT SETTING • File type: TIFF • Compression mode: G4 • Number of pages per file: All INITIAL QUALITY SETTING • Original image type: Text/Photo • Exposure: Auto INITIAL RESOLUTION SETTING 300 dpi DEFAULT DISPLAY SETTINGS CONDITION SETTINGS THE NUMBER OF DIRECT ADDRESS / SENDER KEYS DISPLAYED SETTING 8 (keys) Page 115 115 115 115 115 *1 Appears when the scanner function is enabled. *2 Appears when a FINISHER is installed. *3 Can be enabled when a JOB SEPARATOR TRAY KIT or FINISHER and Right tray are installed. *4 Appears when the PRINTER EXPANSION KIT is installed. *5 Appears when the PRINTER EXPANSION KIT and EXPANSION MEMORY are installed.