Sharp MX-M260 MX-M260 MX-M310 Operation Manual - Page 107
Energy Save
View all Sharp MX-M260 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
SYSTEM SETTINGS (ADMINISTRATOR) ENERGY SAVE SYSTEM SETTINGS ENERGY SAVE OK AUTO POWER SHUT-OFF AUTO POWER SHUT-OFF TIMER PREHEAT MODE SETTING 60min 15min "ENERGY SAVE" provides the following four programs to reduce your power costs. From an environmental perspective, this also helps conserve natural resources and reduce pollution. ● AUTO POWER SHUT-OFF ● AUTO POWER SHUT-OFF TIMER ● PREHEAT MODE SETTING ● TONER SAVE MODE AUTO POWER SHUT-OFF If the machine is not used for the amount of time set in "AUTO POWER SHUT-OFF TIMER", AUTO POWER SHUT-OFF will activate and switch the machine to a standby state that conserves the maximum amount of energy. This program can be used to prevent AUTO POWER SHUT-OFF from operating. When this is done, the "AUTO POWER SHUT-OFF TIMER" setting is disabled. Use this program when circumstances require that AUTO POWER SHUT-OFF be disabled. This program is initially enabled (factory default setting). Caution Rather than disabling the auto power shut-off feature, we suggest that you first try lengthening the time set in "AUTO POWER SHUT-OFF TIMER" In most cases a suitable timer setting will allow work to proceed with minimal delay and still enable you to enjoy the benefits of power conservation. AUTO POWER SHUT-OFF TIMER This program is used to set the amount of time after which "AUTO POWER SHUT-OFF" activates when the machine is not used. This function allows you to reduce power costs, and at the same time helps conserve natural resources and reduce pollution. The time can be set to as long as 240 minutes in increments of one minute. Note • Select a suitable time according to your pattern of use of the machine. • If "AUTO POWER SHUT-OFF" is disabled, the time setting is also disabled. PREHEAT MODE SETTING If the printer is not used for the length of time set with this program after printing is finished, it will enter preheat mode. This function reduces your power costs, and at the same time helps conserve natural resources and reduce pollution. Select the most suitable setting to match your pattern of use of the printer. The time can be set to as long as 240 minutes in increments of one minute. (Preheat mode cannot be disabled.) TONER SAVE MODE The toner save mode will reduce toner consumption by approximately 10% in the automatic, text, and text/photo exposure modes. Copies will be lighter but still adequate for general use. Selection of this mode has no effect on the photo and super photo modes. This program is initially disabled (factory default setting). 6 105