Sharp MX-M260 MX-M260 MX-M310 Operation Manual - Page 95
Job Program Memory
View all Sharp MX-M260 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
JOB PROGRAM MEMORY If you frequently use the same settings for copy jobs, you can store in the settings in a job program. Up to 10 job programs can be stored, and the programs are retained even when the power is turned off. By storing frequently used copy settings in a program, you can eliminate the bother of selecting the settings each time you use them for a copy job. ● After a job program is stored, if any settings of the administrator settings related to the stored job program are prohibited, the related settings in the job program will not be recalled. ● If the overwriting of job programs is prohibited in the administrator settings, it will not be possible to overwrite or delete a job program. ● To exit job program memory mode, press the [CLEAR ALL] key ( ) on the operation panel or touch the [EXIT] key on the touch panel. STORING A JOB PROGRAM 1 Press the [#/P] key ( ). LOGOUT 4 Select the copy settings that you wish to store in the program. TO STORE, MAKE SELECTIONS AND PRESS [OK], TO DELETE, PRESS [CANCEL]. The number of copies cannot be stored. SPECIAL MODES 2-SIDED COPY OUTPUT 8½x11 8½x14 2 Touch the [STORE/DELETE] key. NUMBER. ECALL STORE/DELETE 5 Touch the [OK] key. D PRESS EL]. 8½x11 8½x14 CANCEL OK 8½x11 AUTO EXPOSURE AUTO 8½x11 PAPER SELECT 100% COPY RATIO 5 The selected settings will be stored under the program number selected in step 3. 3 Touch a program number from 1 to 10 in the storage register screen. ROGRAMS SS PROGRAM NUMBER. RECALL STORE Note If a numeric key is selected that has already been programmed, a confirmation screen will appear. To replace the existing program with the new program, touch the [STORE] key and continue from step 4. If you do not wish to replace the existing program, touch the [CANCEL] key to return to the above screen and select a different numeric key. 93