Sharp MX-M260 MX-M260 MX-M310 Operation Manual - Page 139

CHECKING THE TONER QUANTITY AND TOTAL COUNT The approximate quantity of toner remaining and the total count can be displayed as explained below. ● The total count shows the combined output total of the copy, fax, and printer functions. Checking the total count and toner quantity Hold down the [COPY] key. The total count and toner quantity appear while the key is held down. COPY PRINT SCAN ON LINE DATA DATA TOTAL COUNT : 0,123,456 TONER QUANTITY : 100-75% SPECIAL MODES 2-SIDED COPY OUTPUT 8½x11 8½x14 Note • Each 11" x 17" (A3) page is counted as two pages. Two-sided 8-1/2" x 11" (A4) size output is counted as two sheets • The amount of toner consumed will vary depending on conditions of usage and the type of originals copied. The toner quantity display should only be used as an approximate guide. CLEANING THE MACHINE DOCUMENT GLASS AND RSPF If the document glass, RSPF, or scanning glass for originals fed from the RSPF (the long narrow glass surface on the right side of the document glass) become dirty, the dirt may appear on copies. Always keep these parts clean. Stains or dirt on the document glass/RSPF will also be copied. Wipe the document glass, the RSPF and the scanning window on the document glass with a soft, clean cloth. If necessary, dampen the cloth with water. Do not use thinner, benzene, or similar volatile cleaning agents. Do not spray flammable cleaner gas. Gas from the spray may come in contact with the internal 7 Warning electrical components or high-temperature parts of the fusing unit, creating a risk of fire or electrical shock. Surface of document glass Underside of RSPF 137