Sharp MX-M260 MX-M260 MX-M310 Operation Manual - Page 136
Replacing The Toner Cartridge - supplies
View all Sharp MX-M260 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 136 highlights
REPLACING THE TONER CARTRIDGE To check how much toner remains in the toner cartridge (p.137), hold down the [COPY] key. The amount of toner remaining will appear in the display. When less than 25% of the toner remains, obtain a new toner cartridge as soon as possible. When "PREPARE A NEW ONE." appears in the display, the toner cartridge must be prepared. When "TONER SUPPLY IS LOW." appears in the display, be sure to have a new cartridge on hand for replacement at any time as little toner remains. When "CHANGE THE TONER CARTRIDGE." appears in the touch panel, the toner cartridge must be replaced. Follow these steps to replace the cartridge. • Do not throw the toner cartridge into a fire. Toner may fly and cause burns. Caution • Store toner cartridges out of the reach of small children. Note When running long copy jobs or copying originals with many areas of solid black, "TONER REPLENISHMENT IN PROGRESS." may appear in the touch panel and copying may stop even though the cartridge still has toner. When this occurs, the toner is being replenished. Replenishment will last about two minutes. When toner replenishment finishes, copying resumes. 1 Press gently on both sides of the front cover and pull it open. 4 While holding down the lock release lever, insert along guides inside the machine until the cartridge locks into place. 2 Pull the toner cartridge out while pressing the lock release lever. When pulling out the toner cartridge, place your other hand on the green part of the cartridge. Toner cartridge lock release lever Note • After removing the toner cartridge, do not shake it or tap it. Doing so may cause toner to leak from the cartridge. • Dispose of the old toner cartridge in accordance with local regulations. 3 Remove the new toner cartridge from the bag. Grasp both ends of the cartridge and shake it horizontally about 4 or 5 times. Note If dirt or dust adheres to the toner cartridge, remove it before installing the cartridge. 5 Close the front cover. 134