Sharp MX-M260 MX-M260 MX-M310 Operation Manual - Page 109
Device Control
View all Sharp MX-M260 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
SYSTEM SETTINGS (ADMINISTRATOR) STREAM FEEDING MODE Use this program to enable stream feeding mode. When this mode is enabled and originals are scanned from the RSPF, an original can be added to the RSPF within 5 seconds after the previous original is fed, and be automatically scanned using the settings of the previous original. This function can be used with the copy function and the scanner function. This program is initially disabled (factory default setting). DISPLAY LANGUAGE SETTING This program is used to change the language used in the display. The factory default setting is "AMERICAN ENGLISH". DISABLE DISPLAY TIMEOUT When this program is disabled, the display will close the screen that is currently open and return to the initial screen if no keys are touched for 60 seconds. When the program is enabled, the display will not close the screen that is currently open. This program is initially disabled (factory default setting). DISABLING OF TRAY SETTINGS This program can be enabled to prohibit changes to the paper tray settings in the system settings (general). Note that bypass tray settings will still be possible. This program is initially disabled (factory default setting). DISABLING OF CLOCK ADJUSTMENT This program can be enabled to prohibit adjustment of the "CLOCK" setting in the system settings. This program is initially disabled (factory default setting). DEVICE CONTROL SYSTEM SETTINGS DEVICE CONTROL DISABLING OF DOCUMENT FEEDER DISABLING OF DUPLEX DISABLING OF STAPLER OK 1/3 Use these programs when a peripheral device on the machine has failed or when you wish to temporarily disable a device. The programs can also be used to change the function setting of a device as required by your conditions of use. "DEVICE CONTROL" consists of the following programs: ● DISABLING OF DOCUMENT FEEDER ● DISABLING OF DUPLEX ● DISABLING OF STAPLER ● OUTPUT TRAYS ● DISABLING OF OFFSET ● MEMORY FOR PRINTER ● DISABLING OF CENTER TRAY COUNTING ● RETURN FROM COPY MODE TIMING ● MIX SIZE ORIGINAL FEEDING MODE ● SECURITY SETTINGS DISABLING OF DOCUMENT FEEDER Use this program when the RSPF is not operational or you wish to disable the automatic feeding function. (Originals can still be scanned using the document glass.) This program is initially disabled (factory default setting). DISABLING OF DUPLEX 6 Use this program when you wish to disable the two-sided printing function or the function has failed. When this program is enabled, only one-sided printing is possible.This program is initially disabled (factory default setting). DISABLING OF STAPLER (When a FINISHER is installed) Use this program to disable stapling. When this program is enabled, stapling does not take place.This program is initially disabled (factory default setting). 107