Sharp MX-M260 MX-M260 MX-M310 Operation Manual - Page 146
Reversing single pass feeder RSPF - fuser unit
View all Sharp MX-M260 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 146 highlights
APPENDIX Dimensions Operating conditions Noise level Emission concentration (measured according to RAL-UZ62: Editon Jan. 2002) 24-17/32" (W) x 24-23/32" (D) x 31-1/64" (H) (623 mm (W) x 628 mm (D) x 788 mm (H)) Temperature: 59°F to 86°F (15°C to 30°C), Humidity: 20% to 85% Sound Power Level LwA(1B=10dB) Copying: 6.3[B] (MX-M260) Copying: 6.3[B] (MX-M310) Standby: 3.1[B] (MX-M260, MX-M310) Sound Pressure Level LpA (bystander positions) Copying: 50[dB(A)] (MX-M260) Copying: 49[dB(A)] (MX-M310) Standby: 16[dB(A)] (MX-M260, MX-M310) Sound Pressure Level LpA (operator position) Copying: 49[dB(A)] (MX-M260) Copying: 49[dB(A)] (MX-M310) Standby: 17[dB(A)] (MX-M260) Standby: 17[dB(A)] (MX-M310) Noise emission measurement in accordance with ISO 7779. Ozone: 0.02 mg/m3 or less Dust: 0.075 mg/m3 or less Styrene: 0.07 mg/m3 or less *1 First copy time is measured with original on the document glass in full ready condition with fuser at operating temperature and mirror motor at operating speed, actual time may vary based on environment conditions. *2 The warm-up time may vary depending on the power-supply voltage, ambient temperature, and other operating conditions. Reversing single pass feeder (RSPF) Acceptable original Weight Size 9 lbs. to 34 lbs. (35 g/m2 to 128 g/m2) (14 lbs. to 28 lbs. (52 g/m2 to 105 g/m2) for two-sided original) 5-1/2" x 8-1/2" to 11" x 17" Capacity Up to 100 sheets* (Thickness 33/64" (13 mm) and below) Detectable original sizes 5-1/2" x 8-1/2", 5-1/2" x 8-1/2"R, 8-1/2" x 11", 8-1/2" x 11"R, 8-1/2" x 14", 11" x 17" (A4, A3) Weight 16.4 lbs. (7.4 kg) Dimensions 23-1/16" (W) x 19-31/64" (D) x 7-23/64" (H) (586 mm (W) x 495 mm (D) x 187 mm (H)) * When paper weight is 24 lbs. (90 g/m2). Note As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units. 144