Sharp MX-M850 MX-M850 MX-M950 MX-M1100 Operation Manual Suite - Page 17

STATUS INDICATORS There are status indicators at the top of the operation panel. There are both red and green indicators, and these light or blink to indicate the machine's status. Green indicator Red indicator About status indicator lighting and blinking The status indicators light or blink to indicate the following conditions. Red indicator Green indicator Pattern 1 (Job status display) Pattern 2 (Machine status display) Lights solidly A problem exists but the machine can be used. (The toner cartridge is out of toner and the machine is using the spare toner, etc.) Job in progress (During paper feeding and output.) Standby Blinking A problem exists that prevents the machine from being used (out of toner, paper misfeed, etc.) Original scanning in progress Job in progress (During original scanning, paper feeding, and output) Off No problems Standby Jobs cannot be accepted The green indicator has two indicating patterns. The indicating pattern can be changed using "Status Indicator Settings" in the system settings (administrator). The factory default setting is "Pattern 1". • If solidly lit and blinking states occur simultaneously, the blinking state is given priority. • When auto power shut-off has occurred, the status indicators turn off. System Settings (Administrator): Status Indicator Settings Use this to change the indicator settings of the green status indicator. 17