Sharp MX-M850 MX-M850 MX-M950 MX-M1100 Operation Manual Suite - Page 484

• Completed job Display Status "Send OK" Transmission was completed. "In Memory" Reception completed but the fax has not been printed. (The received fax is being held by the print hold function.) "Printed" Finished printing the received fax "Forward OK" The received fax has been forwarded. "Stopped" The job was stopped. "Number of successful transmission destinations/ Total destinations OK" Broadcast transmission or serial polling completed. If transmission to 3 destinations was successful out of a total of 5, "003/005 OK" will appear. "No Response" An error occurred because there was no response from the destination. "OK Report" A receive report was requested for a transmission, the transmission was completed normally, and the receive report was received from the destination. "NG Report" A receive report was requested for a transmission, however, the transmission did not take place correctly and a transmission failed report was received. "No Report" An e-mail was received without an attached file and thus printing was not possible. "Received" An e-mail was received, however, the attached file was not a TIFF-F file or there was no attached file, and thus printing was not possible. "Rejected" A fax was sent from a party that has been blocked. "NGxxxxxx" Transmission/reception was not successful because a communication error occurred (a 6-digit error code appears in xxxxxx.) "Error" An error occurred while the job was being executed. "Busy" An error occurred because the other party was busy. 164