Sharp MX-M850 MX-M850 MX-M950 MX-M1100 Operation Manual Suite - Page 391

Specifying the original scan size (by paper size) If you place a non-standard size original or wish to change the scan size, you must touch the [Original] key and specify the original size manually. Follow the steps below after placing the original in the document feeder tray or on the document glass. Select the mode and display the image settings screen. (1) Touch the tab of the mode that you wish to use. 1 (2) Touch the [Original] key. The automatically detected original size appears to the right of the [Original] key. ☞ IMAGE SETTINGS (page 68) 2 Scan/Original OK Scan Size Auto 8½x11 100% Send Size Auto 2-Sided Booklet 2-Sided Tablet Image Orientation Touch the [Scan Size] key. 3 (1) Scan/Original Auto Manual 5½x8½ 5½x8½R 8½x11 Manual 8½x11R 11x17 8½x13(216x330) 8½x1325(216x340) 8½x14 Long Size Size Input (2) OK AB Inch Specify the scan size. (1) Touch the appropriate original size key. (2) Touch the [OK] key. • If you are sending a long original, touch the [Long Size] key. Use the automatic document feeder to scan a long original. The maximum width that can be scanned is 31-1/2" (800 mm) (the maximum height is 11" (297 mm)). • When [Long Size] is selected, the 2-sided scanning setting and send size cannot be changed. Scanning will take place in mono2. • To specify an AB size for the scan size, touch the [AB Inch] key to highlight the [AB] side and then specify the scan size. 4 Scan/Original OK Scan Size 5½x8½ 100% Send Size Auto 2-Sided Booklet 2-Sided Tablet Image Orientation Touch the [OK] key. 71