Sharp MX-M850 MX-M850 MX-M950 MX-M1100 Operation Manual Suite - Page 327

1 BEFORE USING THE IMAGE SEND FUNCTION This chapter provides information that you should know before using the image send function of the machine. To use the image send function of the machine, an expansion kit is required for each mode. See "Required expansion kits" (page 5). IMAGE SEND FUNCTION OF THE MACHINE The image send function of the machine can be used to send a scanned document by a variety of different methods. The modes and transmission methods that can be used are explained below. Scan modes Scan to E-mail ☞SENDING AN IMAGE IN SCAN MODE (page 36) The scanned file is sent by e-mail. Scan to FTP The scanned file is sent to a specified directory of an FTP server. When the file is sent, it is also possible to send an e-mail to a previously stored e-mail address to inform the recipient of the location of the file. (This is called "Scan to FTP (Hyperlink)".) Scan to Desktop The scanned file is sent to a specified folder on your computer. To use Scan to Desktop, software must be installed from the "Sharpdesk/Network Scanner Utilities" CD-ROM that accompanies the network scanner expansion kit. For the system requirements of the software, see the manual (PDF format) or the Readme file on the CD-ROM. For the installation procedure, see the "Sharpdesk Installation Guide" that accompanies the network scanner expansion kit. Scan to Network Folder The scanned file is sent to a shared folder on a Windows computer on the same network as the machine. Transmission is possible to computers running the following operating systems: Windows 98/Me/NT 4.0/2000/XP/Server 2003/Vista 7