Sharp MX-M850 MX-M850 MX-M950 MX-M1100 Operation Manual Suite - Page 8

INSIDE AND CONNECTOR (20) (21) (22) (20) Toner cartridges These contain toner for printing. When the toner runs out in the cartridge, replace the cartridge with a new cartridge. (21) Main power switch This is used to power on the machine. When using the fax or Internet fax functions, keep this switch in the "on" position. ☞ TURNING THE POWER ON AND OFF (page 18) (22) Conveyor unit This contains the fusing unit that fuses the transferred image to the paper by heat, and the transfer belt that is used to transfer the image to the paper. Caution The fusing unit is hot. Take care not to burn yourself when removing a paper misfeed. Do not touch the transfer belt or allow it to be damaged. This may cause a defective image. (23) Toner collection container This collects excess toner that remains after printing. Your service technician will collect the toner collection container. (23) (24) (24) Service-only connector (25) (26) (27) Caution This connector is for use only by service technicians. Connecting a cable to this connector may cause the machine to malfunction. Important note for service technicians: The cable connected to the service connector must be less than 118" (3 m) in length. (25) USB connector (B type) A computer can be connected to this connector to use the machine as a printer. For the USB cable, use a shielded cable. (26) LAN connector Connect the LAN cable to this connector when the machine is used on a network. For the LAN cable, use a shielded type cable. (27) USB connector (A type) This is used to connect a USB device such as USB memory to the machine. For the USB cable, use a shielded cable. 8