Sharp MX-M850 MX-M850 MX-M950 MX-M1100 Operation Manual Suite - Page 624
The Number of File Name/Subject/Body, Hold Setting for Received Data Print
View all Sharp MX-M850 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 624 highlights
Default Exposure Settings This is used to set the default exposure settings for scanning a document in image send mode. Select [Auto] or [Manual]. When [Manual] is selected, the exposure can be set to one of 5 levels. Default Original Image Type Select the original type beforehand to enable transmission at a resolution suitable for the original (only in scan mode, data entry mode, and USB memory mode). The settings are shown below. • Text/Printed Photo • Text/Photo • Text • Photo* • Printed Photo* • Map* * Does not appear when the exposure is set to [Auto]. Moiré Reduction This reduces the moiré effect (line pattern) that occurs when printed matter is scanned (only in scan mode, data entry mode, and USB memory mode). Must Input Next Address Key at Broadcast Setting This setting is used to require that the [Next Address] key be touched before the next address is entered when performing a broadcast transmission. When this setting is enabled, the [Next Address] key cannot be omitted even if the next address is entered with a one-touch key. If a user attempts to enter the next address without touching the [Next Address] key, a double-beep alarm will sound and the entry will be rejected. Scan Complete Sound Setting The scan complete sound can be selected. The Number of File Name/Subject/Body Keys Displayed Setting This setting is used to select the number of file name / subject keys that are displayed in the screen. The number of keys can be set to 6, 12, or 18. The Number of Direct Address Keys Displayed Setting Select 5, 10, or 15 for the number of one-touch keys that appear in the address book screen. Disable Switching of Display Order This is used to prohibit changes to the order of display (search number order, ascending, descending) in the address book. When this setting enabled, touching a tab on the address book screen does not change the order. The display order will remain fixed at the order that is in effect when this setting is enabled. Hold Setting for Received Data Print (When the Internet fax expansion kit / facsimile expansion kit is installed.) This function holds received faxes and Internet faxes in memory without printing them. The faxes can be printed by entering a password (factory default setting: 0000) with the numeric keys. Password When [Hold Setting for Received Data Print] is enabled, the password (4-digit number) can be changed. These settings can only be configured when there is no received data in the machine's memory (excluding data in a confidential or relay broadcast memory box). Default Verification Stamp (When a stamp unit is installed.) When the automatic document feeder is used, this setting can be enabled to have each original page stamped after it is scanned. 54