Sharp MX-M850 MX-M850 MX-M950 MX-M1100 Operation Manual Suite - Page 487

CHECKING COMPLETED JOBS You can check a list of the destinations, the destinations for which transmission failed, and other detailed information on completed jobs that used document filing function, broadcast transmission jobs, inbound routing jobs and serial polling jobs. Touch the key of the job for which you wish to display information in the completed jobs screen and touch the [Detail] key. The job detail screen (see below) will appear. Detail Broadcast0001 Address 002 EEE EEE 010 FFF FFF Start Time Status 10:01 04/04 NG000000 10:10 04/04 NG000000 OK Retry 1 1 File Failed All Destinations The job name appears at the top of the job detail screen. To view details on the job, touch one of the tabs. The following information appears on each tab. Tab name Information displayed File Shows information on a transmission/reception that used document filing function. To call up the file and use it, touch the [Call] key. Failed This shows information on destinations for which communication failed. A broadcast control number (3-digits) appears in front of each destination. Address: Address name or number Start time: Time at which communication began Status: Description of failure (error) The [Retry] key can be touched to re-attempt transmission to that address. All Destinations Shows all addresses specified in the job. A broadcast control number (3-digits) appears in front of each destination. Address: Address name or number Start time: Time at which communication began Status: Communication result The [Retry] key can be touched to transmit to all addresses again. When Scan to FTP or Scan to Desktop destinations are included in a broadcast transmission, the retry function cannot be used. 167