Sharp MX-M850 MX-M850 MX-M950 MX-M1100 Operation Manual Suite - Page 453

F-CODE CONFIDENTIAL TRANSMISSION Follow the steps below to send a confidential fax by adding an F-code to the fax number. 1 Place the original. Place the original face up in the document feeder tray, or face down on the document glass. 2 (2) 5 10 15 To Cc Condition Settings AAA AAA BBB BBB 1 Address Review 2 CCC CCC DDD DDD Address Entry Global Address Search EEE EEE GGG GGG FFF FFF HHH HHH Sub Address III III JJJ JJJ Sort Address Frequent Use ABCD EFGHI JKLMN Auto Reception Fax Memory:100% OPQRST UVWXYZ (3), (5) Enter the destination fax number. (1) Touch the [Address Book] key in the base screen. (2) Touch the one-touch key of the desired destination. If the destination is not stored in the address book, enter the fax number with the numeric keys. If the sub-address and passcode are stored in the one-touch key, the following sub-steps are not necessary. Go to step 3. (3) Touch the [Sub Address] key. "/" appears. (4) Enter the sub-address with the numeric keys. (5) Touch the [Sub Address] key. "/" appears. (6) Enter the passcode with the numeric keys. If a passcode has been omitted in the memory box of the other machine, (5) and (6) are not necessary. Press the [START] key ( ). Scanning begins. • If you inserted the original pages in the document feeder tray, all pages are scanned. 3 A beep will sound to indicate that scanning is finished. • If you are scanning the original on the document glass, scan each page one page at a time. When scanning finishes, place the next original and press the [START] key ( ). Repeat until all pages have been scanned and then touch the [Read-End] key. A beep will sound to indicate that scanning is finished. This function can be used in combination with a broadcast transmission or timer transmission. This function can also be stored in a program. 133