Sharp MX-M850 MX-M850 MX-M950 MX-M1100 Operation Manual Suite - Page 86

Problem The original size is not automatically selected or the wrong size is selected. The displayed bypass tray paper size is not correct. Point to check Is the original curled or folded? Did you place an original smaller than 5-1/2" x 8-1/2" (A5) size? Is the bypass tray extension pulled out? Solution The correct original size cannot be detected if the original is curled or folded. Straighten the original. Original sizes smaller than 5-1/2" x 8-1/2" (A5) cannot be detected. Enter the original size manually. * When scanning a small original on the document glass, it is convenient to place a blank sheet of paper on top of the original which is the same size (8-1/2" x 11" (A4), 8-1/2" x 11"R (A4R), etc.) as the paper that you wish to use for printing. When loading paper in the bypass tray, be sure to pull out the extension to enable the paper size to be detected correctly. ☞ LOADING PAPER IN THE BYPASS TRAY (page 48) 86