Sharp MX-M850 MX-M850 MX-M950 MX-M1100 Operation Manual Suite - Page 613
Detect Standard in Auto Color, Double Feed Detection Setting, Status Indicator Setting
View all Sharp MX-M850 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 613 highlights
Detect Standard in Auto Color Mode (When the color expansion kit is installed.) When the color mode is set to auto in image send mode, the discrimination point for detecting whether originals are color or black and white can be set to one of 5 levels. To make it easier to detect a black and white original, adjust the setting toward [Closer B/W]. To make it easier to detect a color original, adjust the setting toward [Closer color]. Double Feed Detection Setting (MX-M950/M1100 only) When this function is enabled, a detection function will activate, feeding will stop, and a message will appear if a paper or original double-feed occurs. In this event, follow the instructions in the message. This function can be enabled separately for the automatic document feeder and for each tray. • The detection function does not operate when transparency film or label sheets are used. • When media with a special coating is used, the detection function may activate even though a double-feed has not occurred. Optimization of a Hard Disk This function optimizes the hard drive of the machine by defragmenting data. If a job is in progress, a message will appear and optimization will not begin until the job is finished. During optimization, the following operations are not possible: • Web page access, reception of print data • Use of keys on the operation panel • Turning off the power with the main power switch of the machine. • Auto Power Shut-Off When optimization is completed, the machine will automatically restart. When the document filing function is frequently used and output of files seems somewhat slow, optimizing the hard drive may improve performance. Clear All Job Log Data This is used to clear the entire job log. (There is normally no need to use this function.) A log file is kept of jobs run on the machine. The job log can be used to check general use of the machine. The job log can be written to a computer in CSV format using a Web browser. Status Indicator Setting The illumination pattern when the status indicator is green can be specified. Select pattern 1 or pattern 2. Pattern 1 Solidly lit: Paper feeding or output Blinking: Scanning original Off: Standby Pattern 2 Solidly lit: Ready to receive job Blinking: Processing job (scanning original, paper feeding, output) Off: Not ready to receive job 43