Sharp MX-M850 MX-M850 MX-M950 MX-M1100 Operation Manual Suite - Page 529
Select copy settings and then press the [START] key
View all Sharp MX-M850 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 529 highlights
Select copy settings and then press the [START] key ( ). • Copying begins and the scanned document image is saved to the hard drive. The selected copy settings are also saved. • To prevent accidental saving of the document, the message "The scanned data is stored in the quick file folder." appears for 6 seconds (default setting) after the [START] key ( ) is pressed. The message display time can be changed using "Message Time Setting" in the system settings (administrator). 4 • If you inserted the original pages in the document feeder tray, all pages are scanned. • If you placed the original on the document glass, scan each page one page at a time. When scanning of one page finishes, replace it with the next page and press the [START] key ( ). Repeat until all pages have been scanned and then press the [Read-End] key. To cancel scanning... Press the [STOP] key ( ). • When a file is stored using Quick File, the following user name and file name are automatically assigned to the file. User Name: User Unknown File Name: Mode_Month-Day-Year_Hour-Minute-Second (Example: Copy_04042010_112030AM) Stored to: Quick File Folder When user authentication is used, the user name that was used for login is automatically selected. Only the file name and location of a file stored in the Quick File Folder can be changed. • The storage format used for Quick File is specified by "Default Storage Format Setting" in the system settings (administrator). "Default Storage Format Setting" is initially set to [Hi-Speed Print Mode]. To cancel Quick File... Touch the [Quick File] key in the screen of step 2 so that it is no longer highlighted. 15