Sharp MX-M850 MX-M850 MX-M950 MX-M1100 Operation Manual Suite - Page 66

USING MANUAL FINISHING The procedure for using manual finishing is explained below. Before beginning the procedure, configure the paper settings in the system settings for the paper you will load in the inserter. ☞ PAPER TRAY SETTINGS (page 77) COPY IMAGE SEND Ready to scan for copy. DOCUMENT FILING MANUAL FINISHING Touch the [MANUAL FINISHING] key. 0 The base screen for manual finishing will appear. Plain Plain Special Modes Plain 8½x11 2-Sided Copy 1 Exposure Auto 5. 11x17 1. 2. 6. 8½x11 8½x11 11x17 3. 11x17 7. 4. 8½x14 11x17 Output File Copy Ratio 100% Original Auto 8½x11 Paper Select Auto 8½x11 Plain Quick File 2 (3) (1) 3 Set the output function. Plain 8½x11 Plain 8½x11 Top Tray Offset Tray Staple Saddle Stitch Load the paper to be used for finishing in the inserter. For the procedure for loading paper on the paper tray, see "INSERTER" (page 62). The orientation in which the paper is loaded on the tray will vary depending on which manual finishing function is used. Make sure you load the paper in the correct orientation for the function you are using. ☞ PAPER LOADING ORIENTATION (FOR THE STAPLE AND PUNCH FUNCTIONS) (page 69) ☞ PAPER LOADING ORIENTATION (FOR FOLDING) (page 70) (2) Fold Select the manual finishing function. (1) Select the paper tray on which you loaded paper. (2) Select the function you wish to use. (3) Select the output tray. 2 Hole Punch 3 Hole Punch Press the [START] key ( ) Output takes place using the selected function. 4 When the staple or saddle stitch function is used, all sheets of paper loaded in the tray are stapled together as a single set. To stop manual finishing... Press the [STOP] key ( ). 66