Sharp MX-M850 MX-M850 MX-M950 MX-M1100 Operation Manual Suite - Page 644
Image Adjustment, Off-Center Adjustment
View all Sharp MX-M850 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 644 highlights
Administrator Adjustment "Administrator Adjustment" is a special adjustment function for the administrator. This lets the administrator correct the position and size of images and perform fine adjustment of the output positions of peripheral devices. Image Adjustment Fine-adjustment of devices related to the image can be performed. Adjustment is performed at the factory prior to shipment, and thus the initial values of the settings will vary on each unit. Edge Adjustment This adjusts the position of the leading edge of the scanned or printed image (the position where the image begins). Copy Edge Adjustment (Original Edge Standard Position) This adjusts the position of the leading edge of the original for copying. Set a number from 10 to 99 (1 = 0.1 mm). A higher number will cause a greater delay in the timing of recognition of the leading edge of the original, moving the leading edge of the scanned image in the direction opposite to the direction of original feeding. Image Increase the adjustment value Copy Adjustment (Registration Motor ON Timing) This adjusts the leading edge of the printed image by adjusting the response speed of the resist roller (the roller that adjusts the printing position on the paper being fed). Set a number from 1 to 99 (1 = 0.1 mm). A higher number will move the leading edge of the printed image in the direction opposite to the direction of paper feeding. Separate settings can be specified for the feeder and auto duplex unit (ADU). Image SPF Original Edge Adjustment (Original Scan Start Position) This adjusts the position of the leading edge when an original is scanned using the automatic document feeder. Set a number from 1 to 99 (1 = 0.1 mm). A higher number will cause scanning of the original to start later, moving the leading edge of the scanned image in the direction opposite to the direction of paper feeding. (On the reverse side, the leading edge of the scanned image will move in the direction of paper feeding.) Separate settings can be specified for the front and reverse sides. Off-Center Adjustment Image off-center adjustment can be performed. Print Off-Center Adjustment This adjusts the center of the printed image in each tray and in the auto duplex unit (ADU). Set a number from 1 to 99 (1 = 0.1 mm). A higher number moves the image toward the back of the machine. Original Off-Center Adjustment This adjusts the center of original scanning on the document glass and in the automatic document feeder. Set a number from 15 to 85 (1 = 0.1 mm). A higher number moves the image toward the front of the machine. Increase the adjustment value 74