Sharp MX-M850 MX-M850 MX-M950 MX-M1100 Operation Manual Suite - Page 507
Problems Related To Scan Results
View all Sharp MX-M850 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 507 highlights
Problem Cannot write to USB memory. (When using USB Memory Scan.) Point to check Is the USB memory device connected securely to the machine? Solution Make sure that the USB memory device is connected securely. PROBLEMS RELATED TO SCAN RESULTS Problem The scanned image is clipped. The quality of the scanned image is poor. The scanned image is blank. Point to check Is the original scan size setting smaller than the actual original size? Is the original printed matter such as a book or magazine? When scanning a color or grayscale original, is the color mode set to "Mono2"? Is a destination included that has [TIFF-S] selected for the format? Is the original placed face up or face down correctly? Solution Set the scan size to the actual original size. If you have intentionally set a smaller size than the actual original size, note carefully the placement position of the selected scan size when placing the original. For example, when scanning an 8-1/2" x 11" (A4) original using a 5-1/2" x 8-1/2" (B5) setting on the document glass, align the original using the document glass scale at the left edge to fit the area you wish to scan into the 5-1/2" x 8-1/2" (B5) scanning area. For the procedure for placing the original, see the User's Guide. When the original is printed matter, vertical patterns (moiré) may occur. Touch the [Exposure] key in the base screen to open the exposure setting screen. The [Moiré Reduction] checkbox appears in this screen. This checkbox can be selected to reduce the moiré effect. (only in scan mode and USB memory scan mode) It may also be possible to reduce the moiré effect by changing the resolution setting or shifting the original (or changing its angle) slightly on the document glass. Setting the color mode to "Mono2" replaces the colors in the original with either black or white. This is suitable for text-only originals; however, originals with illustrations should be scanned with the color mode set to [Grayscale], [Full Color], or [Auto] - [Grayscale]. If the color expansion kit is not installed, scanning will only be possible in black and white. When a broadcast transmission is performed that includes both scan mode destinations and Internet fax destinations that have [TIFF-S] selected for the format, the resolution will remain fixed at [200X200dpi] even if a different resolution setting is selected. If you wish to send an image scanned at high resolution to scan mode destinations, send the image in a separate transmission. When using the document glass, the original must be placed face down. When using the automatic document feeder, the original must be placed face up. 187