Sharp MX-M850 MX-M850 MX-M950 MX-M1100 Operation Manual Suite - Page 363
Sending An Image In Usb Memory Mode
View all Sharp MX-M850 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 363 highlights
SENDING AN IMAGE IN USB MEMORY MODE Follow the steps below to send a scanned image to a commercially available USB memory device that has been connected to the machine. This stores the file in the USB device. • Consult your dealer or retailer for USB memory devices that can be used. • When a default address is configured in "Default Address Setting" in the system settings (administrator), the mode cannot be changed. To switch to USB memory mode, touch the [Cancel] key in the touch panel and then follow the steps below. Connect the USB memory to the USB connector (Type A) on the machine. 1 Place the original. • When placing the originals, orient them as shown below. Originals Document feeder tray Place the original face up. Document glass Place the original face down and align the corner with the tip of the arrow mark in the top left corner of the document glass scale. Portrait orientation* 2 A B A B AB B A Landscape orientation AB AB * To place a large portrait-oriented original, place it as shown above in "Landscape orientation" and specify the placement orientation in step 4. • Place 5-1/2" x 8-1/2" (A5) size originals in portrait (vertical) orientation ( ). If placed in landscape (horizontal) orientation ( ), an incorrect size will be detected. For a 5-1/2" x 8-1/2"R (A5R) size original, enter the original size manually. • Originals cannot be scanned in succession from both the automatic document feeder and the document glass and sent in a single transmission. 43