Sharp MX-M850 MX-M850 MX-M950 MX-M1100 Operation Manual Suite - Page 413
Select the special modes., Select the erase settings., Touch the [Special Modes] key.
View all Sharp MX-M850 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 413 highlights
Select the special modes. If the base screen is not displayed, touch the [Condition Settings] key. (1) Make sure that the desired mode is selected. If the desired mode is not selected, touch the tab of that mode. 3 (2) Touch the [Special Modes] key. (3) Touch the [Erase] key. ☞ SPECIAL MODES (page 87) When you return to the base screen after specifying the destination, the base screen of the mode of the specified destination appears. (1) Scan/Special Modes Erase Edge Erase Center Erase Edge+Center Erase Side Erase (2) (3) OK Cancel OK Edge 1/2 (0 1) inch 4 Select the erase settings. (1) Touch the desired erase mode. Select one of the 4 erase modes. Touch the [Side Erase] key to open the following screen. Erase Side Erase Up Cancel OK Erase position for Side 2 Left Right Down Same Side as Side 1 Different Side from Side 1 Touch the checkbox of the edge that you wish to erase and make sure that a checkmark ( ) appears. When performing two-sided scanning, set the erase edge on the reverse side. • If you touch the [Same Side as Side 1] key, the edge in the same position as on the front side will be erased. • If you touch the [Different Side from Side 1], the edge in the position opposite to the erased edge on the front side will be erased. When you have completed the settings, touch the [OK] key. (2) Set the erasure width with the 0" to 1" (0 mm to 20 mm) can be entered. keys. (3) Touch the [OK] key. 93