Brother International PE-DESIGN PLUS2 Instruction Manual - Page 94
Creating Design for Multi-Position Hoops, Tutorial 8: Creating Design for, Multi-Position Hoops
View all Brother International PE-DESIGN PLUS2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
Creating Design for Multi-Position Hoops Tutorial 8: Creating Design for Multi-Position Hoops This program enables you to create multi-position designs that you can stitch in any multi-position hoop attached to your embroidery machine. a a b b c c ABC Example of multi-position hoop: 100 × 172 mm hoop Although the size of the design that can be embroidered using an multi-position hoop is 130 × 180 mm (or 100 × 100 mm, depending on the sewing area of the embroidery machine), first determine which of the three installation positions (indicated as a, b, and c in the illustration above) the multi-position hoop will be installed at and determine the orientation of the design. When creating the design, each design section can only be as large as the sewing area of the embroidery machine. The sample file for this tutorial is located at: Documents (My documents)\PE-DESIGN PLUS2\Tutorial\Tutorial_8 Step 1 Step 2 Step 3 Step 4 Selecting the Design Page size Creating the design Optimizing hoop changes Checking the pattern Step 1 Selecting the Design Page size 1 Click , then [Design Settings]. 2 Select [Hoop Size] and choose a Design Page size of [*100 × 172 mm] or [*130 × 300 mm] from the selector. For this example, select [*100 × 172 mm]. Then, click [OK]. 93