Brother International PE-DESIGN PLUS2 Instruction Manual - Page 97
Saving the design, Checking the pattern
View all Brother International PE-DESIGN PLUS2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Tutorial 8: Creating Design for Multi-Position Hoops Step 4 Checking the pattern 1 Click , then [Design Property]. 2 Check the sewing order of each pattern and the number of times the hoop position will be changed. a b Only the patterns that would be sewn at the current position in the hoop installation order appear in the Design Page, and the embroidering area for the current hoop position is outlined in red. a The position in the hoop installation order for the currently displayed pattern. b To display information for patterns at other positions in the hoop installation order, click [Previous] or [Next]. a If a pattern is larger than the embroidery area or if a pattern is positioned so that it does not completely fit within an embroidery area, the error message appears. After the pattern causing the error is displayed, select the pattern and change its size or position. ■ Saving the design The design for a multi-position hoop is created by considering the pattern for each hoop installation position as one pattern, then combining them. One multi-position hoop design is saved as a single file (.pes). b • If the file size or the number of color changes is larger than the specified number, or if one of the patterns does not completely fit within an embroidery area, the error message appears. • The patterns appear on the machine as shown below. : This pattern is sewn when the hoop is installed at the top installation position (position a). : This pattern is sewn when the hoop is installed at the middle installation position (position b). : This pattern is sewn when the hoop is installed at the bottom installation position (position c). Therefore, the frame installation position sewing order for the pattern shown above is b, a, then c. 96