Brother International PR1055X Operation Manual - Page 102
Embroidering appliqué patterns
View all Brother International PR1055X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
Embroidering appliqué patterns Some of the built-in embroidery patterns can be used for embroidering appliqués. Follow the procedures described below to embroider appliqués using the patterns with [APPLIQUE MATERIAL], [APPLIQUE POSITION] or [APPLIQUE] in the region display at the top of the thread color sequence display. [APPLIQUE MATERIAL], [APPLIQUE POSITION] and [APPLIQUE] are assigned to a specific needle bar number. *Depending on the thread color display setting, the display may appear as (Appliqué Material), (Appliqué Position) or (Appliqué). • If the appliqué is cut out along the inside of the embroidered cut line, the appliqué may not be correctly attached to the fabric. Therefore, carefully cut out the appliqué along the embroidered cut line. If this step is not performed carefully, the appliqué will not be cleanly finished. In addition, carefully remove any excess threads. Frame the base fabric or garment in the embroidery d frame, and then embroider an "APPLIQUE POSITION" pattern. The appliqué position is embroidered, and then the machine stops. 1 1 appears in the screen at places where the machine is stopped. ■ Procedure for embroidering appliqués Place stabilizer on the back of the appliqué fabric/ a material. Frame the fabric for the appliqué (from step a) in the b embroidery frame, and then embroider an [APPLIQUE MATERIAL] pattern. The line that indicates where the appliqué will be cut out is embroidered, and then the machine stops. Lightly apply fabric glue or spray adhesive to the back e of the appliqué piece that was cut out, and then attach the appliqué piece to the base fabric at the position embroidered using the [APPLIQUE POSITION] pattern in step d. • If an iron-on stabilizer is used to attach the appliqué piece to the base fabric, iron the pieces together without removing the base fabric from the embroidery frame. After attaching the appliqué piece, embroider an f [APPLIQUE] pattern. The appliqué is finished. Remove the appliqué fabric from the embroidery c frame, and then carefully cut along the embroidered cut line. • Depending on the pattern, an [APPLIQUE] pattern may not be available. In this case, embroider the appliqué using thread in the color of a part of the embroidery. Finish stitching the embroidery. g 100