Brother International PR1055X Operation Manual - Page 136
After the desired settings have been specified, touch
View all Brother International PR1055X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 136 highlights
After the embroidery pattern has been opened by the j machine, the embroidering screen appears. The opened embroidery pattern appears in the pattern display area with the icon for the Link function. • USB cable connection • Wireless LAN connection After the desired settings have been specified, touch l to return to the embroidering screen. • USB cable connection • Wireless LAN connection 1 1 2 2 3 3 1 Icon for Link function 2 10-digit machine ID 3 Number of the pattern in the queue 1 Icon for Link function 2 The machine's name 3 Number of the pattern in the queue Memo • While the machine is connected to the computer, the machine's status can be displayed by using a function of the embroidery editing software. If multiple machines are connected at the same time, check the status of the machines using the 10-digit machine ID that appears in the machine's screen. The following information can be viewed from the computer. - Machine's status - Information on the embroidery data being embroidered and received by the machine (time until the next time that the machine stops, number of color changes, embroidering time, maximum embroidery speed, pattern size, size of frame being used on the machine) To change the embroidering settings for the opened k embroidery pattern, touch . • Touch Touch when the following message appears. to return to the embroidering screen. Touch , and then press the "Start/Stop" m button to start embroidering. When embroidering is finished, the following message appears. To open another pattern sent from the computer, n touch , and then repeat the procedure starting from step j to continue embroidering. To stop embroidering or to embroider the same pattern again, touch . Note • The embroidering screen settings specified in step l are saved even if was touched to continue embroidering after embroidering is finished. Memo • If the machine is turned off while it is embroidering, the resume operation can be used the next time it is turned on. The embroidering settings screen appears. 134