Brother International PR1055X Operation Manual - Page 24

TURNING ON THE MACHINE WARNING • Use only regular household electricity for the power source. Using other power sources may result in fire, electric shock, or damage to the machine. • Make sure that the plugs on the power supply cord are firmly inserted into the electrical outlet and the power supply cord receptacle on the machine. Otherwise, a fire or electrical shock may result. • Do not insert the plug on the power supply cord into an electrical outlet that is in poor condition. • If any of the following occur, turn off the machine and unplug the power supply cord, otherwise a fire, an electric shock or damage to the machine may result. • When you are away from the machine. • After using the machine. • If a power outage occurs while the machine is being operated. • If the machine is not operating properly, for example, when there is a loose or cut connection. • During electrical storms. • If the machine is not to be used for a long period of time, unplug the power supply cord, otherwise a fire may result. • For U.S.A. only This appliance has a polarized plug (one blade wider than the other). To reduce the risk of electrical shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the electrical outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper electrical outlet. Do not modify the plug in any way. Insert the power supply cord into the power cord a receptacle, then insert the plug into a wall outlet. Switch on the main power switch on the right side of b the machine to "I". CAUTION • Be sure to use the included power cord for this machine. • Do not plug this machine in with extension cords or multi-plug adapters with any other appliances plugged into them, otherwise a fire or an electric shock may result. • Do not plug in or unplug the power supply cord with wet hands, otherwise an electric shock may result. • When unplugging the power supply cord, be sure to first turn off the machine, and then grasp the plug when unplugging the cord. Pulling on the cord may damage it or result in a fire or an electric shock. • Do not allow the power supply cord to be cut, damaged, modified, forcefully bent, pulled, twisted, or bundled. In addition, do not place heavy objects on the cord or expose it to heat, otherwise damage to the cord, fire or an electric shock may result. If the power supply cord or its plug is damaged, stop using the machine, and then take the machine to your authorized Brother dealer for repairs before continuing use.  The LCD screen comes on. When the machine is turned on, the opening movie is c played. Touch anywhere on the screen to display the message below. Touch . d  The pattern type selection screen appears, and the "Start/Stop" button lights up in red. 22