Brother International PR1055X Operation Manual - Page 85
Pass the thread through the hole with
View all Brother International PR1055X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
BASIC EMBROIDERY The numbers indicate the thread path for each of the numbered needle bars. Be very careful to correctly thread the needle bars. Pass the thread through the hole (with the c corresponding needle bar number) in thread guide C, then through the corresponding hole in thread guide D. As an example, the threading for spool pin 1 is shown. 2 Pass the thread of a specified color through the holes b on the thread guide, making sure that you have the thread color matched to the coordinating needle bar. Pass the thread from spool pins 1, 3, 5, 6, 8 and 10 through the holes in both thread guides A and B. Pass the thread from spool pins 2, 4, 7 and 9 through the hole in thread guide B only. 1 Thread guide C 2 Thread tension lever 3 Holes in thread guide C 4 Thread guide D Note • Before threading, make sure to slide the thread tension lever to the left so that the holes in thread guide C are fully open. 1 Thread guide A (There are 6 holes in this thread guide) 2 Thread guide B (There are 10 holes in this thread guide) Pass the thread through the hole in the number 1 upper d thread guide and pull the thread toward you. 1 Hole in upper thread guide 83