Brother International PR1055X Operation Manual - Page 96

Touch and to go back through the stitching d to a point where stitches have already been embroidered. 1 2 1 Each touch of this key moves one stitch back through the stitching. 2 Each touch of this key moves ten stitches back through the stitching. As you move to the area where your design was last stitched, by touching the or , the embroidery frame will move, allowing you to place the cross mark directly on the last stitch shown. Note • It is recommended to stitch over the top of the last two or three stitches for complete coverage. Touch . e Touch . f  The embroidering screen appears again. Touch , and then press the "Start/Stop" g button to continue embroidering. ■ Specifying a stitch number Touch . a Use the number keys to enter the desired stitch b number, and then touch . 1 2 3 1 Stitch line 2 Cross mark 3 Embroidery progress bar You can also touch the specific point of the embroidery progress bar to move the stitch count to the desired point. If the needle bar is moved back too far through the stitching, touch or to go forward through the stitching. 1 2  The embroidery frame moves to the specified stitch.  When is touched in this screen to enlarge the display, a stitch number can be specified with the number keys. Touch to return to the previous screen, and then c continue with step e on page 94. Memo • Touch to reset the stitch number and embroider from the first stitch. • To specify the last stitch number, select the last thread color, and then touch . 1 Each touch of this key moves one stitch forward through the stitching. 2 Each touch of this key moves ten stitches forward through the stitching. 94