Brother International PR1055X Operation Manual - Page 98
Embroidering from the beginning or middle, of the pattern
View all Brother International PR1055X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
Embroidering from the beginning or middle of the pattern If you wish to restart embroidering from the beginning, for example, if trial embroidery was performed and an incorrect thread tension was used or if the wrong thread color was used, restart the embroidering using the forward/backward stitch key. In addition, you can go forward or back through the stitching by thread color or by stitch to start stitching at any position of the pattern. Note • Be careful when going back or forward through the stitching since the embroidery frame moves at the same time. Press the "Start/Stop" button to stop the machine. a • If necessary, trim and remove the embroidered stitches. Touch . b The stitch navigating screen appears. Touch to check the needle drop point on the LCD c screen. • Touch to zoom up the camera view twice the size of normal view. Use the scroll bar to select the thread color, and then d touch , , , , , , and to select the specific stitch. • Touch to embroider from the beginning. 1 2 1 The stitch from where embroidering is to begin can also be specified by using the scroll bar. 2 The thread color at the top of the thread color sequence display is the color of the area currently selected. Touch this area to specify the stitch from where embroidering is to begin. The needle bar case moves and the current needle bar moves to the embroidering position, and then the embroidery frame moves and current needle position is indicated. Touch . e After selecting the stitch from where embroidering is f to begin, touch . The embroidering screen appears again. Touch , and then press the "Start/Stop" g button to begin embroidering. Embroidering begins from the specified point. ■ Specifying a stitch number Touch . a The camera view window appears and the cross mark in the camera view indicates the needle drop point. Use the number keys to enter the desired stitch b number, and then touch . 1 Needle drop point 96 1 The embroidery frame moves to the specified stitch.