Brother International PR1055X Operation Manual - Page 184
correctly detected.
View all Brother International PR1055X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 184 highlights
Symptom Probable Cause/Remedy Page The upper thread breaks. A bobbin designed specifically for this machine is 33 not used. The automatic needle-threading mechanism is broken. Adhesive is attached to the needle. • Replace the needle. The fabric is not taut. * 176 61, 62 The thread quality is poor. - • The thread quality is too weak due to age of thread. Replace thread. The embroidery data contains stitches with a 124 pitch of zero. The embroidery data contains many stitches with 124 an extremely small pitch. The thread density of the embroidery data is too 190 fine. Three or more overlapping stitches are being embroidered. • Using a data design system, correct the thread density and overstitching settings in the embroidery data. Lint or dust has accumulated in the thread 176 tension disc. The bobbin thread breaks. The bobbin thread is not correctly threaded. 34 The bobbin is scratched or does not rotate 33 smoothly. • Replace the bobbin. The bobbin case is damaged. 33 • Replace the bobbin case. The thread is tangled. 173 A bobbin designed specifically for this machine is 33 not used. Lint or dust has accumulated in the thread 176 tension disc. Stitches are skipped. The upper thread is not threaded correctly. 82 The needle is bent or blunt. 176 The needle is not installed correctly. 176 Dust has accumulated under the needle plate or 173, 174 in the hook. The needle and the hook are not correctly * passing each other. The thread twist is either too tight or too loose. - • Improper twisting results in irregular loop formation. Try using a new spool. Symptom Probable Cause/Remedy Page The embroidery pattern is misaligned. The thread is tangled. - • Use tweezers to remove any tangled thread from the hook. The fabric is not secured in the embroidery frame 61, 62 (for example, the fabric is not taut). The embroidery frame is too large for the size of 65 the embroidery. The thumb screws on the embroidery frame 21 holder are loose. Appropriate stabilizer (backing) is not used. 60 The embroidery frame is not correctly attached to 64 the carriage. • Correctly attach the embroidery frame to the carriage. Make sure that the pins on the left and right arms of the embroidery frame holder securely fit into the holes in the handles on the embroidery frame. The carriage or the embroidery frame is hitting - objects. • The pattern may become misaligned if the carriage or embroidery frame is hitting objects. The fabric is caught or pinched. - • Stop the machine, and then correctly position the fabric. The carriage moved while removing embroidery - frame. • The pattern may become misaligned if the presser foot was hit or the carriage was moved while embroidery. • Be careful when removing and reattaching the embroidery frame while embroidery. If the carriage is moved, turn the machine off, then on again. The correct frame position at the time that the machine was stopped is stored in the machine's memory, and the embroidery frame is returned to the correct position. The design was not digitized correctly. - • The design may need more pull compensation or underlay to accommodate stretchy or high- napped fabrics. The size of the installed embroidery frame is not correctly detected. The thumb screws on the embroidery frame 21 holder are loose. The starting position for the embroidery frame is horizontally misaligned. The thumb screws on the embroidery frame 21 holder are loose. 182