Brother International PR1055X Operation Manual - Page 113
Affix the second embroidery positioning sticker onto
View all Brother International PR1055X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
Affix the first embroidery positioning sticker onto the l fabric as shown on machine. Then, touch . ADVANCED EMBROIDERY Affix the second embroidery positioning sticker onto m the fabric as shown on machine. Then, touch . 3 The camera detects the first positioning sticker. Note • Use new positioning stickers. If a sticker is reused, it may easily peel off. If the sticker peels off during this procedure, the patterns cannot be connected. Start the project again with new fabric and stabilizer. • Using fingers apply pressure to the corners of the positioning sticker to firmly affix it to the fabric. If the sticker is not firmly attached, the camera may incorrectly detect the sticker. • If any of the following messages appear, reattach the positioning sticker in the correct position. Make sure that the sticker is affixed with the large circle at the top. The camera detects the second positioning sticker. After the two positioning stickers have been detected, n the following message appears. 1 1 Embroidering area 111