Brother International PR1055X Operation Manual - Page 55
If the pattern position cannot be aligned using
View all Brother International PR1055X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Touch k to display the needle drop point. BASIC EMBROIDERY Remove the thread mark. o Touch . p Touch , and then press the "Start/Stop" q button to start embroidering. 2 Touch the positioning keys to move the embroidery l frame until the thread mark on the fabric is aligned on the needle drop point in the camera view window. 1 2 1 Thread mark on the fabric 2 Positioning keys • Touch to check the embroidering position. Memo • Touch to enlarge the camera view. By enlarging the camera view, you can make a close adjustment for the needle drop position moving the embroidery frame little by little. Touch to return to the normal camera image. If the pattern position cannot be aligned using the m positioning keys, rehoop the fabric, and then try again to align the position with the positioning keys. Note • After you have aligned the position of the combined border pattern, do not rotate the pattern in the embroidering settings screen. If the pattern is rotated in the embroidering settings screen after alignment, the pattern will not be properly aligned with the thread mark or starting point. Touch n to return to the previous screen. 53