Brother International PR1055X Operation Manual - Page 189

APPENDIX Error messages Cause/solution 31 Needle threader is in threading position. This message is displayed when another operation is performed while the automatic needle-threading mechanism is threading the needle. Press the automatic needle-threading button, and then perform the other operation after the needle is threaded. (page 85) 32 No more patterns can be added to this combination. This message is displayed when trying to combine 101 or more patterns. Up to 100 patterns can be combined. 33 Not enough available memory to save the pattern. This message is displayed when the pattern cannot be saved because the Delete another pattern? memory is full. Delete some patterns. 34 Not enough space. Delete some patterns or use a This message is displayed when the memory capacity of the USB media has different USB media. been exceeded. Delete some patterns or use a different USB media. 35 OK to recall and resume previous memory? This message is displayed when the machine is turned off, then on again before embroidering is completed. Touch to resume embroidering. If the embroidering screen was displayed before the machine was turned off, back up several stitches, and then continue embroidering. (page 97) 36 OK to revert to previous color changes? This message is displayed when being changed. is touched while thread colors are 37 OK to separate the combined border pattern? This message is displayed when a combined border pattern is being rotated in the embroidering settings screen. 38 Panel communication error. When this message is displayed, consult your nearest authorized Brother dealer. 39 Pattern extends to the outside of embroidery frame. This message is displayed when the entered character patterns exceed the Add no additional characters. width of the embroidery frame. 40 Pattern extends to the outside of embroidery frame. This message is displayed when the font of the character pattern is changed This function cannot be used at this time. to one with a larger size, causing the pattern to extend beyond the embroidery frame. 41 Picker error This message is displayed when the thread picker (page 33) does not operate correctly. Remove the thread entangled on the thread picker, and then touch . 42 Please set up the "Thread antenna" 43 Power supply voltage error.(24V high) 44 Power supply voltage error.(24V low) 45 Power supply voltage error.(40V high) 46 Power supply voltage error.(40V low) 47 Press the unlock key to unlock the machine. 48 Preventive maintenance is recommended. 49 Remove the embroidery positioning mark. This message is displayed when thread guide assembly support is not prepared. Prepare the thread guide assembly. (page 19) When this message is displayed, consult your nearest authorized Brother dealer. When this message is displayed, consult your nearest authorized Brother dealer. When this message is displayed, consult your nearest authorized Brother dealer. When this message is displayed, consult your nearest authorized Brother dealer. This message is displayed when the thread trimming button is pressed before the machine is unlocked. Touch trimming function. to use the thread This message is displayed when the machine needs maintenance. (page 179) This message is displayed when the machine has recognized the embroidery position mark. Remove the embroidery positioning sticker and touch to continue. 50 Select a pattern. 51 Set the clock. This message is displayed when there is no embroidery pattern selected and the "Start/Stop" button is pressed. This message is displayed when the time/date is not set. Set time/date. (page 23) 5 187