Brother International PR1055X Operation Manual - Page 112

Select the second pattern B, then touch . h 3 1 2 4 Touch , and then select how the pattern will be i connected.  The pattern connection setting screen appears. Touch the position for the second pattern will be j connected on the screen, and then touch . In this example, touch the right side of the first pattern. 1 Touch the connecting area 2 Second pattern B 3 First pattern A 4 Move the second pattern. Rotate the second pattern in a clockwise arc referring the first pattern as a center. Rotate the second pattern in a counterclockwise arc referring the first pattern as a center. Rotate the second pattern 90 degrees in a clockwise arc.  Message appears on screen and carriage will move after touching . Note • The second pattern will be automatically connected to the first pattern without adjustment. Change the position of the second pattern manually using . • The position of the second pattern can be moved using your finger or the included touch pen. • Use , or if you want to align the pattern to the corner of the center of the first pattern, when changing the pattern's connecting position. Prepare two embroidery positioning stickers. k We will follow the on-screen instructions to affix these two stickers to the fabric so that the positioning marks can be detected by the camera. Note • Use the positioning stickers included with this product or purchase replacement stickers (refer to "Optional accessories" on page 14) from your Brother dealer. If any other sticker is used, the camera may not recognize it. • You can adjust the position of the second pattern, using the keys described below. 110