Brother International PR1055X Operation Manual - Page 188

Error messages Cause/solution 11 Communication time out error. 12 Data receiving command error. 13 EEPROM read/write error. 14 Embroidering stop. 15 Failed to save file. 16 Go to Embroidering Screen and press the unlock key. 17 Impossible to set the start & the end points. 18 Inappropriate needle stop position When this message is displayed, consult your nearest authorized Brother dealer. When this message is displayed, consult your nearest authorized Brother dealer. When this message is displayed, consult your nearest authorized Brother dealer. When this message is displayed, consult your nearest authorized Brother dealer. This message is displayed when you try to save more than 100 camera image or settings screen image files in the USB media. In this case, delete a file from the USB media or use different USB media. This message is displayed when the thread trimming button is pressed while a screen other than the embroidering screen or embroidering settings screen is displayed. Display either the embroidering screen or embroidering settings screen. This message is displayed when embroidery cannot begin from the specified starting position. Change the starting position or move the frame and change the embroidering position. (page 126) This message is displayed when the needle has stopped at an incorrect position. Turn the handwheel so that the mark on the handwheel is at the top, and then touch . 19 Includes a special pattern that cannot be saved to This message is displayed when you try to save a copyright protected external memory. Save the pattern in the machine's pattern to USB media or computer. memory. According to copyright laws, patterns that are illegal to reproduce or edit cannot be saved to USB media or computer. If this message is displayed, save the pattern in the machine's memory. 20 Machine PCB power off. When this message is displayed, consult your nearest authorized Brother dealer. 21 Machine PCB reset. When this message is displayed, consult your nearest authorized Brother dealer. 22 Main motor current error. When this message is displayed, consult your nearest authorized Brother dealer. 23 Main motor encoder connect error. When this message is displayed, consult your nearest authorized Brother dealer. 24 Main motor encoder signal error. When this message is displayed, consult your nearest authorized Brother dealer. 25 Main motor rotate error. When this message is displayed, consult your nearest authorized Brother dealer. 26 Main motor speed error. When this message is displayed, consult your nearest authorized Brother dealer. 27 Needle bar case home position error. This message is displayed when the needle bar case cannot be moved to its initial position. Touch to automatically reset the needle bar case. 28 Needle bar case position error This message is displayed when the needle bar case has stopped at an incorrect position. Touch to automatically reset the needle bar case. 29 Needle case motor has been locked. This message is displayed when the needle bar case motor has locked up. Touch to automatically reset the needle bar case. 30 Needle threader error This message is displayed when the automatic needle-threading mechanism does not operate correctly. Remove the thread entangled in the automatic needle-threading mechanism, and then touch . 186