Brother International PR1055X Operation Manual - Page 91
Understanding the embroidering screen
View all Brother International PR1055X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
BASIC EMBROIDERY Understanding the embroidering screen From this screen, the total number of thread colors, the embroidering order and embroidering time can be checked, the needle bar settings can be specified, and the needle placement forward or backward can be done. Keys available in this screen differ when you set [Manual Color Sequence] to [ON] in settings screen. (page 58) Display No. Key Name Function This red line indicator shows 4 Spool change when the thread spools will indicator need to be changed. Return key Quit embroidering and return to the embroidering settings screen. Reserve stop key While embroidering, touch this key for the machine to stop prior to the next color beginning. Page 91 - 119 2 1 2 7 3 8 4 5 6 Display No. Key Name Function The embroidering progress is shown by the red mark in the 1 indicator. Touch to Progress bar display (in the indicator) only the thread color being embroidered. Shows the part of the pattern that will be embroidered 2 with the thread color shown Region first in the thread color display sequence display. Thread color sequence display Shows the order for the thread color changes. During embroidering, this display scrolls automatically so that the color of the thread currently being embroidered appears at the top. Page - - - Indicates the needle bar 3 number where the thread - Needle bar color at the left is assigned. number The thread color sequence display shows the first seven thread colors. To check the sequence for the eighth and - later thread colors, touch Scroll bar or , or touch the scroll bar. Switch spool key Change the needle bar (Not available settings from the screen in the without changing the thread 57 [Manual spools on the machine. Color Sequence] mode) Enable the needle bar Temporary settings to manually be 120 5 needle bar specified. settings key Move the needle forward or backward through the stitching. Use this key in the following situations: • If the thread breaks or runs Forward/ out while embroidering 93 Backward • To restart embroidering stitch key from the beginning • To continue embroidering after the machine was turned off Specify the maximum embroidery speed. • Specify a low speed for thin, thick or heavy Maximum fabrics. 190 embroidery • When using a weak thread speed key such as metallic thread, specify an embroidery speed of 400 spm. Unlocks the machine so it can start embroidering 6 within 10 seconds. When Unlock key this key is touched, the 87 "Start/Stop" button flashes in green. 89