Brother International PR1055X Operation Manual - Page 68

■ Embroidery frame holders Two types of embroidery frame holders (embroidery frame holder A and embroidery frame holder B) are included with this machine. Embroidery frame holder A is used with the four included embroidery frames and the optional 300 mm (W) × 200 mm (H) (11-3/4 inches (W) × 7-7/8 inches (H)) hoop. Embroidery frame holder B is used with the optional embroidery frames. In addition, if you purchase optional round frame set, clamp frame set or compact frame set, specified frame holder C, D or E is included. For details on which embroidery frame can be installed on each embroidery frame holder, refer to "Types of embroidery frames/frame holders and their applications" on page 66. 1 Embroidery frame holder A 2 White corner covers 3 Embroidery frame holder B 4 Light gray corner covers 5 Magnet 6 Embroidery frame holder C (optional) 7 Dark gray corner covers 8 Embroidery frame holder D (optional) 9 Embroidery frame holder E (optional) ■ When difficult to replace the embroidery frame Depending on the position of the needle bars, it may be difficult to replace the embroidery frame. In that case, follow the procedure described below to move the embroidery frame. Touch . a  The needle bar move screen appears. Touch . b  The carriage automatically moves to a position where the embroidery frame can easily be replaced. • Touch to close the needle bar move screen and to move the carriage to the previous position. ■ Types of embroidery frames/frame holders and their applications When the reference page is "*", contact your authorized Brother dealer. Embroidery frames that use embroidery frame holder A Embroidering area Embroidery frame Usage Reference page Extra-large embroidery 360 mm (W) × 200 mm (H) frame (14 inches (W) × 7-7/8 inches (H)) Use when embroidering connecting characters or patterns, combined patterns or large patterns. page 62 Extra-large embroidery 300 mm (W) × 200 mm (H) frame (optional) (11-3/4 inches (W) × 7-7/8 inches (H)) Use when embroidering connecting characters or patterns, combined patterns or large patterns. page 62 Flat frame (optional) 300 mm (W) × 200 mm (H) (11-3/4 inches (W) × 7-7/8 inches (H)) Use when embroidering jackets and other thick garments. * Large embroidery frame 180 mm (W) × 130 mm (H) (7-1/8 inches (W) × 5-1/8 inches (H)) Use when embroidering patterns with a size less than 180 mm (W) × 130 mm (H) (7-1/8 inches (W) × 5-1/8 inches (H)). page 62 Medium embroidery frame 100 mm (W) × 100 mm (H) (4 inches (W) × 4 inches (H)) Small embroidery frame Use when embroidering standard-sized patterns. page 62 60 mm (W) × 40 mm (H) (2-3/8 inches (W) × 1-1/2 inches (H)) Use when embroidering small-sized patterns, such as name tags. page 62 66