Brother International PR1055X Operation Manual - Page 33
Using the [Others] menu to set up the wireless, network connection
View all Brother International PR1055X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
When the following message appears, touch . e When a connection is established, the following message appears. GETTING READY ■ Using the [Others] menu to set up the wireless network connection The [Others] menu contains the following items. 1 1 2 3 Touch f to exit the setup. 1 TCP/IP settings can be manually entered. 2 Shows the MAC address. 3 Use when proxy settings are required. Memo • While connected, the signal strength is indicated by the icon in the lower-right corner of the display. • Once a wireless network connection has been set up, a connection will be established each time the machine is turned on. However, [Wireless LAN Enable] in the network settings screen must remain set to [ON]. 31
GETTING READY
31
1
e
When the following message appears, touch
.
When a connection is established, the following
message appears.
f
Touch
to exit the setup.
■
Using the [Others] menu to set up the wireless
network connection
The [Others] menu contains the following items.
1
TCP/IP settings can be manually entered.
2
Shows the MAC address.
3
Use when proxy settings are required.
Memo
•
While connected, the signal strength is indicated
by the icon in the lower-right corner of the display.
•
Once a wireless network connection has been set
up, a connection will be established each time the
machine is turned on. However, [Wireless LAN
Enable] in the network settings screen must remain
set to [ON].
1
2
3