Brother International PR1055X Operation Manual - Page 114
After the positioning stickers have been detected,
View all Brother International PR1055X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
While making sure that the two positioning stickers do not peel off, remove the embroidery frame from the machine, and then rehoop the fabric. Be sure to hoop the fabric so the next pattern and both the positioning stickers are within the embroidering area. Reattach the frame and touch . Note • If the next pattern and the centers of the large circles of the two positioning stickers do not fit within the embroidering area, use a larger embroidery frame. If a larger embroidery frame cannot be used, continue to step o, and then refer to "Changing the position of a sticker" on page 114 to reposition the sticker. • If the sticker peels off during this procedure, the patterns cannot be connected. If this occurs, restart the procedure from the beginning. • If either of the following messages appear, rehoop the fabric so that the next pattern and both the positioning stickers are within the embroidering area as indicated in the screen. Touch to detect the positioning stickers. 2 Pattern to be embroidered next 3 Centers of large circles for stickers 4 Embroidery sheet The camera detects the two positioning stickers. 112 After the positioning stickers have been detected, the o message to inform you that it recognized the embroidery positioning sticker appears. Touch , and then remove the stickers.