Brother International PR1055X Operation Manual - Page 99
Resume embroidering after turning off the, machine
View all Brother International PR1055X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
BASIC EMBROIDERY When is touched in this screen to enlarge the display, a stitch number can be specified with the number keys. Touch to return to the previous screen, and then c continue with step e on page 96. Memo • If no stitch number was entered when is touched, embroidering will begin from the first stitch. Resume embroidering after turning off the machine In either of the following cases, the remaining stitches of the embroidery are stored in the machine's memory. • If the machine's power switch is pressed to turn off before stopping embroidering. Cut the thread before the machine's main power switch is turned off, otherwise the thread may be pulled or may catch when the carriage returns to its initial position after the machine is turned on again. • If the machine was accidentally turned off, for example, due to a power outage, while it was embroidering. The remainder of the embroidery can be performed when the machine is turned on again; however, some of the stitches that were already embroidered may be embroidered again. 2 1 2 1 Cancel embroidering and display the pattern type selection screen to select a new pattern. 2 Continue embroidering. The embroidering screen displayed before the machine was turned off appears. Note • You may need to advance or reverse through the stitches to get to the correct needle drop position. 97