Brother International PR1055X Operation Manual - Page 125

ADVANCED EMBROIDERY Changing the display guides The guides in the pattern display area can be specified. The machine automatically detects the type of embroidery frame holder and embroidery frame that are installed and displays them. Touch , then .  The embroidery settings screen appears. 2 1 3 4 1 How the guides will appear with the specified settings can be previewed here. 2 Type of embroidery frame holder Displays the type of the embroidery frame holder. 3 Area Displays the size of the embroidery frame that is actually installed. (page 66) 4 Center point marker or grid lines Select the type of the center point marker and the grid lines, and whether or not to display them. ■ Type of embroidery frame holder The machine automatically detects the type of embroidery frame holder that is installed. If no embroidery frame holder is installed, the setting for "Cap frame/Cylinder frame" is displayed. Changing the thread color information You can display the name of the thread colors, embroidery thread number or the embroidering time. When the machine is purchased, the thread color number [#123] is selected. Memo • Colors on the screen may vary slightly from actual spool colors. • [Original], imported data retains the brand thread created with the software, is set as a default. Touch , then . a  The embroidery settings screen appears. Touch and to display the name of the thread b colors, the embroidery thread number or the embroidering time. When the thread number [#123] is displayed, touch c and to select from the embroidery thread brand. 3 Embroidery frame holder A (included) Embroidery frame holder B (included) Embroidery frame holder C (Optional) Embroidery frame holder D (Optional) Embroidery frame holder E (Optional) Cap frame/Cylinder frame (Optional) Magnetic sash frame (Optional) * * No icon appears since this frame is installed without an embroidery frame holder. Specifying jump stitch trimming / "DST" jump codes for trimming You can specify whether or not jump stitches are cut. In addition, when using Tajima embroidery data (.dst), you can specify whether or not the thread is cut according to the specified number of jump codes. [ON]: The machine converts the "jump" code to a trim code, based on the number specified on the next line. [OFF]: The machine does not convert the "jump" code to a trim code. When the machine is purchased, [ON] is selected and the number of jumps is set to [3]. Note • If the setting is changed from the previous setting, the new setting is applied to the subsequent embroidery. Touch , then . a  The embroidery settings screen appears. 123